Polycom KIRK 14117800 - Manual (Page 182)

182 System Management
14117800, Ed.2.6
1 Under the Administration menu, click Reset, and then click Reset.
Figure 117 Adm. Page: Administration/Reset/Reset page
2
Click OK to reset the system immediately.
Note:
When resetting the KWS600v3 immediately all calls are terminated.
10.1.10.2 Resetting KIRK Wireless Server 600v3 When System is Idle
Instead of resetting the system immediately and terminating all ongoing calls, it is
also possible to reset the system, when the system is idle. The reset is done when
there are no active calls in the KWS600v3.
1 Under the Administration menu, click Reset.
Figure 118 Adm. Page: Administration/Reset/Idle Reset page
2
Click OK to reset if the system is idle (no active calls, etc.).