Figure 113, Updating, Refer to – Polycom KIRK 14117800 User Manual
Page 178
178
System Management
14117800, Ed.2.6
10.1.9.1 Updating Configuration File
1
Under the Administration menu, click Upload.
Figure 113
Adm. Page: Administration/Upload/Config page
2
Click Browse.
A dialog box appears.
3
Select the configuration file in question, and then click Open.
4
Click Upload.
Wait until the system has finished updoading.
5
Click either Reset Immediately or Idle Reset.
When resetting the KWS600v3 immediately, all calls are terminated and the
KWS600v3 is reset. When resetting the KWS600v3 when the system is idle, the reset is
done when there are no active calls in the KWS600v3.
10.1.9.2 Updating Firmware
The software of the KWS600v3 can be updated. To update the software you load a file to
the system. Contact your distributor for newest software.