Micromod RetroPAK: SLC Configuration Manual - Manual (Page 239)

Function Code 11 – Low Select
GENERAL DESCRIPTION
This function selects and outputs the input with the lowest algebraic value.
UTILIZATION
The MOD 30ML/MODCELL compound FC11 used here has an EX function block
(Expression block).
Figure 11 .1.
Function Code 11
The Expression block FC11 has four inputs called S1, S2, S3 and S4. You can connect as
many as 4 inputs into this block.
The result (R) of this EX block is the lowest of the 4 inputs..
INPUTS – OUTPUTS
Signal Block Type Description
S1 FC11 Input – S1
Floating Point Connect to the FC11.S1 signal to
the Low Selector.
S2 FC11 Input – S2
Floating Point Connect to the FC11.S2 signal to
the Low Selector.
S3 FC11 Input – S3
Floating Point Connect to the FC11.S3 signal to
the Low Selector.
S4 FC11 Input – S4
Floating Point Connect to the FC11.S4 signal to
the Low Selector.
11 - 1