In-Situ Con TROLL PRO Operators Manual (purchased before 10 May 2012) - Manual (Page 27)

Logged Data 27
4. When the search is complete, the device list will be displayed. Each Con TROLL
PRO will be displayed with their respective site names. If a site name is not yet
programmed into the Con TROLL, the displayed name will be the serial number
of the unit. Select the Con TROLL PRO you want to connect to and click Next.
The software will map a virtual serial port to the bluetooth connection of the
selected Con TROLL PRO.
5. Click Next and the connection wizard will complete and return to the connection
manager. To open the bluetooth connection for use, select the connection and
double click it, or right click and select “Connect”.
6. Each time you connect, you will have to enter the passkey. The passkey for the
Con TROLL PRO is by default its serial number. In our example, we have to
enter 123456. If an Administrator password is configured for the local display,
the passkey will be that password.
7. Once connected, the connection manager will show the bluetooth connection as
active