In-Situ Con TROLL PRO Operators Manual (purchased before 10 May 2012) - Manual (Page 7)

Getting Started 7
8. If you have only one probe connected, a row labeled “C” appears. References to
Probe C refer to the Con TROLL PRO.
For additional information on setting up the probes, see Section 2.1 Adding a Probe
After Initial Configuration or Deletion on page 11.
1.4 USING THE VIEW FUNCTION
1. Select the View option. An arrow () will point to the first menu item.
2. Select View again to move the arrow () to the next menu item.
3. With the arrow () pointing to a menu item, use the Up and Down arrow keys
to cycle through all the available parameters on both sensors and the control
module.
1.5 CHANGING THE DATE AND TIME
1. On the Main menu, select Settings, Date & Time.
2. Three menu items will appear:
• Date shown as: 2009-04-28
• Time shown as: 14:40:03
• UTC shown as: -06:00
3. Use Select to choose the menu item.
4. Use the arrow keys to choose the new setting.
5. Select Enter.
1.6 DISPLAY (SCREEN) APPEARANCE
1.6.1 Locking the Display
When the display is locked, users will not be able to scroll through the parameters
using the View menu option.
1. On the Main menu, select Settings, Display.
2. Choose Lock View.
3. Press Select to toggle between the locked view and the unlocked view.
1.6.2 Changing the Display Contrast
1. On the Main menu, select Settings, Contrast.
2. Use the arrow keys to brighten or darken the screen’s appearance.
3. Select Enter to save your setting.
1.6.3 Changing the Language
The Con TROLL PRO monitor can display English, Spanish or French.
Menu View
A 7.42 mg/L
C 838.7 mbar