In-Situ Con TROLL PRO Operators Manual (purchased before 10 May 2012) - Manual (Page 26)

26 Logged Data
9. Click the COM Ports tab. Note the Port number of the Outgoing port (in this
example, Port 17). (You will need to select this port in the Win-Situ 5 Comm
Settings window in Section 5.2.4 on page 29.)
5.2.2 Configuring the Bluetooth ® Utility for PCs Not Factory-Enabled with Bluetooth
Communications (Example)
The following example shows how to configure the Bluetooth utility provided with
the Cirago Bluetooth USB Adapter using Toshiba 6.0 Software and Drivers. If you
have a different third-party Bluetooth USB adapter and software CD, you will have a
different set of steps. The steps below are provided for illustrative purposes only.
1. Install the Bluetooth drivers from the manufacturers disk provided with the
Bluetooth hardware adapter.
2. Start the Bluetooth connection manager from the icon in the bottom right corner
of the screen:
3. Click the “New Connection” button to start the connection wizard. Select the
“Express Mode” option and click Next. Allow the unit to search for devices.