HP StorageWorks 2.128 SAN Director Switch - Manual (Page 133)

Fabric OS 5.x administrator guide 133
Displaying the port statistics
1. Connect to the switch and log in as admin.
2. Issue the
portStatsShow
command.
Port statistics include information such as number of frames received, number of frames sent, number of
encoding errors received, and number of class 2 and class 3 frames received.
See the HP StorageWorks Fabric OS 5.x command reference guide for additional
portStatsShow
command information, such as the syntax for slot or port numbering. The following example shows the
output from the
portStatsShow
command:
Displaying a summary of port errors for a switch
1. Connect to the switch and log in as admin.
2. Issue the
portErrShow
command.
See the HP StorageWorks Fabric OS 5.x command reference guide for additional
portErrShow
command information.
switch:admin> portstatsshow 3/7
stat_wtx 0 4-byte words transmitted
stat_wrx 0 4-byte words received
stat_ftx 0 Frames transmitted
stat_frx 0 Frames received
stat_c2_frx 0 Class 2 frames received
stat_c3_frx 0 Class 3 frames received
stat_lc_rx 0 Link control frames received
stat_mc_rx 0 Multicast frames received
stat_mc_to 0 Multicast timeouts
stat_mc_tx 0 Multicast frames transmitted
tim_rdy_pri 0 Time R_RDY high priority
tim_txcrd_z 0 Time BB credit zero
er_enc_in 0 Encoding errors inside of frames
er_crc 0 Frames with CRC errors
er_trunc 0 Frames shorter than minimum
er_toolong 0 Frames longer than maximum
er_bad_eof 0 Frames with bad end-of-frame
er_enc_out 0 Encoding error outside of frames
er_bad_os 0 Invalid ordered set
er_c3_timeout 0 Class 3 frames discarded due to timeout
er_c3_dest_unreach 0 Class 3 frames discarded due to destination unreachable
er_other_discard 0 Other discards
er_crc_good_eof 0 Crc error with good eof
er_inv_arb 0 Invalid ARB
open 0 loop_open
transfer 0 loop_transfer
opened 0 FL_Port opened
starve_stop 0 tenancies stopped due to starvation
fl_tenancy 0 number of times FL has the tenancy
nl_tenancy 0 number of times NL has the tenancy
zero_tenancy 0 zero tenancy
switch:admin>