HP StorageWorks 2.128 SAN Director Switch - Manual (Page 66)

66 Configuring standard security features
Sample modification of the options for configuring SNMP MIB traps:
The following
snmpMibCapSet
parameters for FA-TRAP appear in the preceding example:
•
connUnitStatusChange:
Indicates that the overall status of the connectivity unit has changed. Its
variables are:
•
connUnitStatus
: The status of the connection unit
•
connUnitState
: The state of the connection unit
•
connUnitEventTrap:
Indicates that the connectivity unit has generated an event. Its variables are:
•
connUnitEventId
: The internal event ID
•
connUnitEventType
: The type of this event
•
connUnitEventObject:
Used with the
connUnitEventType
to identify the object to which the
event refers.
•
connUnitEventDescr
: The description of the event.
•
connUnitSensorStatusChange:
Indicates that the status of the sensor associated with the
connectivity unit has changed.
•
connUnitSensorStatus:
The status indicated by the sensor.
•
connUnitPortStatusChange:
Indicates that the status of the sensor associated with the
connectivity unit has changed.
•
connUnitPortStatus:
Shows overall protocol status for the port.
•
connUnitPortState:
Shows the user-specified state of the port hardware.
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB
SW-MIB
FA-MIB
FA-TRAP
FA-MIB (yes, y, no, n): [yes]
FICON-MIB (yes, y, no, n): [no] y
HA-MIB (yes, y, no, n): [no] y
SW-TRAP (yes, y, no, n): [no] y
swFCPortScn (yes, y, no, n): [no]
swEventTrap (yes, y, no, n): [no]
swFabricWatchTrap (yes, y, no, n): [no]
swTrackChangesTrap (yes, y, no, n): [no]
FA-TRAP (yes, y, no, n): [yes]
connUnitStatusChange (yes, y, no, n): [no]
connUnitEventTrap (yes, y, no, n): [no]
connUnitSensorStatusChange (yes, y, no, n): [no]
connUnitPortStatusChange (yes, y, no, n): [no]
SW-EXTTRAP (yes, y, no, n): [no] y
FICON-TRAP (yes, y, no, n): [no] y
linkRNIDDeviceRegistration (yes, y, no, n): [no]
linkRNIDDeviceDeRegistration (yes, y, no, n): [no]
linkLIRRListenerAdded (yes, y, no, n): [no]
linkLIRRListenerRemoved (yes, y, no, n): [no]
linkRLIRFailureIncident (yes, y, no, n): [no]
HA-TRAP (yes, y, no, n): [no] y
fruStatusChanged (yes, y, no, n): [no]
cpStatusChanged (yes, y, no, n): [no]
fruHistoryTrap (yes, y, no, n): [no]
Avoid-Duplicate-TRAP (yes, y, no, n): [no] y
switch:admin>