HP VMA-series Memory Arrays - Manual (Page 167)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 167
List all jobs that currently exist in the system.
show jobs <job_id>
Lists the following information about the specified job:
Any command results are also displayed. If an error string exists for the job, it is
displayed.
Media Management Commands
This section describes commands for managing and monitoring block storage
(vSHARE) media devices.
Media Initialization
media init device <device> type [block] [name <name>] [force]
Command Syntax
Media Enable
[no] media [block] id <id> enable
Job <job_id>
Status <pending|inactive|completed>
Name <friendly_name>
Comment <comment>
Absolute range
Commands <seq. #1>.<seq. #2>. ...
device <device> The <device> parameter indicates the array to be
initialized, and is a string of the form: ata-
VIOLIN_MEMORY_ARRAY_xxxxxxxxxxxxxx
type The type indicates block (vSHARE).
name The name parameter is used to name the container.
The default is to reuse the existing name/serial
number.
force The force parameter is used to force initialization
of an array that has already been initialized.