HP VMA-series Memory Arrays User Manual
Page 207
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
207
Creating LUNs
To create a LUN:
1.
Select vSHARE > Manage LUNs in the VMA Web Interface.
The LUN Management page appears.
2.
Select a container in the Container ID drop-down list in the Container area.
Every LUN is created within a container. Note the size and percentage used of
the container may restrict the number and size of the LUNs created within the
container.
3.
Click the Create LUN button in the LUNs area.
The Create LUN window appears.
4.
Define the number of LUNs in the # LUNs to Make space.
5.
Define the name of the LUNs in the LUN Name space.
If the number of LUNs to be created is greater than one, the name of each of
the newly created LUNs will be appended with an index number beginning
with 1 up to the number of LUNs created.
6.
Define the block size of the LUNs.
•
To define the size of the LUN based on the space available, select the
“Use all available space equally” button.
•
To manually define the size of each LUN, select the “Specific size per
LUN” button and enter the size (in GB) in the space.
The size of the LUNs may be restricted by the space available in the container.
7.
Define the block size of the LUN.
•
To define the block size at 512 bytes, select the “512 bytes” button.
•
To define the block size at 4096 bytes, select the “4096 bytes” button.
Not all systems can handle 4096-byte blocks. Use 512-byte blocks if you are
in doubt.
8.
To securely erase the drive, select the “Zero-out drive space when creating”
check box.