HP VMA-series Memory Arrays User Manual
Page 96
96
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
Media Block Enable Commands
Before a media device can be used for block storage, it must be enabled. This
section describes commands for enabling and disabling block storage media
devices on a vSHARE HP VMA SAN Gateway.
The
enable
commands described in this section can be used in Config mode only.
For more information, see
Commands include:
•
media block id <id> enable
•
no media block id <id> enable
•
media block id all enable
•
no media block id all enable
media block id <id> enable
The
media block id <id> enable
command enables a specified block storage
media device. The
block
option specifies a vSHARE block media device.
Manufacturer serial no: 6C057CWX00134
Device ID: ata-VIOLIN_MEMORY_ARRAY_6C057CWX00134
Violin model: VMA Array
Violin serial no: Strad134
Violin Part number: V1010
Violin Revision: