HP VMA-series Memory Arrays - Manual (Page 170)

170 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
show stats media all cache id <id> [continuous] [detail]
[global]
show stats media [block] id all [continuous] [detail] [global]
[all]
show stats media [block] id <id> [continuous] [detail]
[global] [all]
Display read and write statistics for block storage or cache
media devices in one or more nodes in the cluster. The scope of each command is
the same as the corresponding show media command, described above. The
command show stats media is an alias for show stats media [block]
id all .
The statistics are read and write rates (in MB per second) for these intervals:
• The current ten-second sample.
• The last five minutes.
If the continuous option is specified, the display of statistics is updated
continually. Press CTRL+C to exit the display.
vSHARE Commands
This section describes CLI commands for configuring and managing vSHARE
block storage.
Containers
Show Containers
show containers
> enable
# show stats media
Media Stats Summary (sampled @10 secs)
Read (bytes/s) Write (bytes/s)
Location Media ID Current Last 5m Current Last 5m
------------------------------------------------------------------------
PCI 1 HA-3 8.00k 8.00k 4.00k 3.00k
PCI 2 HA-2 8.00k 10.00k 4.00k 3.00k
PCI 3 HA-1 8.00k 18.00k 4.00k 4.00k
PCI 4 HA-4 8.00k 18.00k 4.00k 3.00k