Targets, Initiator groups – HP VMA-series Memory Arrays User Manual

Page 171

Advertising
background image

AM456-9007B Rev 02

HP VMA SAN Gateway Installation and User Guide

171

The

show containers

command displays all containers created within a VMA

Array enabled for block storage.

Targets

Show Targets Command

show targets [node <cluster node id>] [hostname <hostname>]
[protocol fc] [id <target id>] [sessions] [detail]

The

show targets

command displays all Fibre Channel. Use the

hostname

,

protocol

, and

id

parameters to filter the targets returned.

The command returns the node, hostname, target port, status (enabled or not), and

address (WWN). The

detail

parameter returns the network bindings for each

target.

Initiator Groups

igroup Create Command

[no] igroup create name <name> initiators [initiator_name ..]

The

igroup create

command creates an initiator group and, optionally, one or

more or Fibre Channel initiators. Fibre Channel initiator identifiers (WWNs) are

generated automatically by an HBA.

> enable
# show targets
Node Hostname Proto Target Enab Address
------------------------------------------------------------------------------
1 lab-n1 fc hba-a1 yes wwn.21:00:00:1b:32:9b:83:3b
1 lab-n1 fc hba-a2 yes wwn.21:01:00:1b:32:bb:83:3b
1 lab-n1 iscsi iscsi yes iqn.2004-02.com.vmem:lab-n1
1 lab-n1 iscsi targ2 yes iqn.2004-02.com.vmem:lab-n1:targ2
2 lab-n2 fc hba-a1 yes wwn.21:00:00:1b:32:9f:f3:ce
2 lab-n2 fc hba-a2 yes wwn.21:01:00:1b:32:bf:f3:ce
2 lab-n2 iscsi iscsi yes iqn.2004-02.com.vmem:lab-n2
2 lab-n2 iscsi targ2 yes iqn.2004-02.com.vmem:lab-n2:targ2

Advertising
This manual is related to the following products: