HP VMA-series Memory Arrays - Manual (Page 269)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 269
• Always wear a grounded wrist strap when handling printed circuit boards.
• Treat all assemblies, components and interface connections as static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a minimum
while removing or installing boards, to minimize buildup of static charge.
Lithium Battery Caution
WARNING! Observe the correct polarity when changing the lithium battery. There
is a danger of explosion if battery is installed incorrectly.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions and local
disposal requirements.
Note: Switzerland: Annex 4.10 of SR 814.013 applies to batteries.
Cabinet Safety Precautions
WARNING! Cabinets are heavy even when empty. Exercise caution when moving
cabinets whether equipment is installed in the cabinet or not. Avoid rolling cabinets
on rough or uneven surfaces or inclines greater than 10 degrees. Unloading
cabinets from the pallet and movement of cabinets should be performed by at least
two people.
Slidable products are not to be extended from the cabinet while the equipment is
on the shipping pallet. The cabinet must be unloaded from the pallet and all anti-
tip devices properly installed prior to extending any slidable product.
Once installed, all anti-tip devices must remain in place to maintain stability. Only
one slidable product must be extended at a time.
Failure to follow these precautions can result in damage to equipment or injury to
personnel.
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household waste.