HP ESL E-series Tape Libraries - Manual (Page 72)

1
2
1 Empty panel location
2 Removable magazine
Figure 51 Insert the removable magazine
5. Manually close the load port door by pushing the load port assembly into the cabinet. You will hear
a click when it locks into position.
Remove removable magazines
To remove the removable magazines from the library:
1. From the OCP, open the appropriate load port (right or left).
2. Open the appropriate load port door (right or left).
a. From the Status screen, press Ports.
b. Use the Up and Down buttons to highlight the load port to open, then press Select.
c. When the curser highlights Open, press Select.
The display will show a note reminding you to open the load port door. If you have not
opened the load port door, do so now.
d. Press OK to continue.
3. When the port is ejected, push down on the handle at the top of the removable magazine.
4. Pull the top of the removable magazine away from the panel.
5. Pull up on the handle at the top of the removable magazine and remove it from the panel.
NOTE:
You can safely carry a fully loaded removable magazine by the handle.
72 Library operations