HP 3Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 20)

2. Create a switch port zone group.
a.
In the navigation tree, select Zone Groups and click Create Zone Group.
NOTE: As shown in this example, when the Switch Port radio button is selected,
information about devices connected to the switch ports is included in the display.
b. Enter a Name for the zone group, select Switch Port, and click each port on the pair of
switches to be included in the zone group. The following example creates one large zone
group that includes all ports on the pair of switches. Then, click OK.
NOTE: As shown in this example, unused switch ports can be included in a zone group.
20 Example: Configuring shared SAS storage enclosures