HP 3Gb SAS Switch for HP BladeSystem c-Class User Manual
Page 30
Advertising
b.
Enter a Name for the zone group, select Drive Bay, and select drive bays to be included
in the zone group. The following example creates one zone group that includes 10 disk
drives. Then, click OK.
NOTE:
As shown in this example, unpopulated drive bays can be included in a zone
group.
c.
After a moment, the display is refreshed, with the new, unsaved zone group displayed
in the navigation tree. Click Save Changes. After the save is completed, the entry in the
navigation tree is updated and shows that it is not assigned to any server device bays.
NOTE:
Until a server device bay is assigned a zone group, it cannot access the storage.
30
Example: Configuring zoned SAS storage enclosures
Advertising