HP 3Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 35)

More Information task
To view detailed information about a device, select the device in the navigation tree and click
More Information.
NOTE:
•
The More Information task is available for each component in the navigation tree, in both the
Zoning and the Maintain tabs.
•
If there are any status alerts for the device, they are included in the displayed information.
Clear Configuration task
Use this option to delete all user-defined zone groups and server device bay assignments.
IMPORTANT: If zoned SAS storage enclosures are connected, before clearing the configuration,
logical units associated with enclosures connected to the switch must be deleted. If a deleted zone
group has disk drives in bays that are configured as part of a logical unit, there may be I/O
problems and the controller may send error messages to the system logs about an illegal drive
movement.
To perform this task, select the switch in the navigation tree, and click Clear Configuration.
NOTE:
•
To clear information about a single zone group, use the Delete option. For more information,
see
“Delete task” (page 42) .
More Information task 35