Olympus E-20N - Manual (Page 145)

143
8
8
On the arrow pad, press to
move the green highlight to YES.
9
Press the button.
“STARTING PIXEL MAPPING...” is
displayed. Mapping requires about 10
seconds, then the display switches off.
If a warning is displayed, close the
eyepiece shutter then perform the
procedure again from Step 1. The warning
message disappears and the menu
resumes in five seconds or when you
press the
button.
10
Turn the power switch to align the
white line with OFF.
The pixel mapping and adjustment is
completed.
Note
• The warning message is displayed and Pixel Mapping is cancelled if the eyepiece shutter is not
completely closed outdoors in bright light, or if the camera is warm. If this occurs, close the
eyepiece shutter, or let the camera cool, and then execute Pixel Mapping again.
• If the power accidentally turns off during Pixel Mapping, repeat the steps from the beginning.
8
9
Warning display
10 ON
OFF