Olympus E-20N - Manual (Page 184)

182
Windows 2000/Me
Follow one of the procedures below.
(1) Single-clicking the icon on the Taskbar.
1 Click the Unplug or Eject Hardware icon on the Taskbar in the lower right corner of the
desktop. (See illustration below.)
2 When the message to halt the drive appears, click this message.
3 When the Unplug Hardware message tells you that the device can be removed safely, click
the OK button.
4 Disconnect the cable.
(2) Double-clicking the icon on the Taskbar.
1 Double-click the Unplug or Eject Hardware icon on the Taskbar in the lower right corner of the
desktop.
2 When the Unplug Hardware dialog box opens, click the name of the camera in the hardware
device list, and then click the Stop button.
3 When the Unplug Hardware message tells you that the device can be removed safely, click
the OK button.
4 Disconnect the cable.
If Windows returns the message below when attempting to disconnect the camera, close all
applications and repeat from the beginning.
Macintosh
1
Confirm that the card access lamp
on the camera is off.
2
Drag and drop the camera drive
icon onto the Trash icon, or select
Eject from the Special menu.
1
Card access lamp
Transferring Images between the Camera and Computer via a Direct Connection (continued)