Olympus E-20N - Manual (Page 161)

159
10
8
On the arrow pad, press to
move the green highlight to YES.
9
Press the button.
The format icon and message are
displayed on the monitor while the
selected card is being formatted. All
images, including images which have been
protected, are deleted from the card.
The card access lamp blinks while the
card is formatting and then goes off after
formatting has been completed.
Note
• Formatting a card requires a few seconds.
While the card access lamp is blinking, never
switch the camera off, never reset the mode
dial, and never open the card cover.
During formatting
8 9
Card access lamp
Blinks during formatting,
goes off after formatting
is completed.