JLG X14JH Operator Manual - Manual (Page 29)

BOOM LIFT MODELS X14JH
JLG
26 X14JHR0220311
R EF . D ESCRIPTIONS P ICTOGRAMS NEAR THE
CONTROL
1 Starter pushbutton
2
Engine starting pushbutton
It allows a selected start of the engine by means
of selector 4 directly from the control place on the
control car.
3
Work selector
For the machine, you can select two working methods by
using the jib or not.
Without the jib method the maximum admitted
load on the control car is 200 kg (2 x 80 kg people + 40kg
equipment) in std two‑seater basket.
Using the jib method the maximum admitted load on
the control car is 120 kg (1 x 80kg person + 80kg equip‑
ment).
4
Engine type and emergency descent selector
This selector allows to choose either electric or
petrol/diesel engine or, in case of emergency to excite, for
emergency descent, the solenoid valves situated on the
cylinders on the first, second and third arm descending
the frame overhead part through gravity. The particular
construction of this selector forces the operator, in case of
emergency descent, to keep it continuously rotating,
otherwise the selector would go back automatically to
the pre‑selected position.
5
Emergency stop pushbutton
It allows stopping all the machine functions.
Turn the pushbutton to make the machine operative.
6
PLC feeding pilot light
This green light indicates voltage in the electric system of
the machine and therefore in the PLC which controls all
its functions.
T HERMIC ENGINE
E LECTRIC ENGINE
E MERGENCY DESCENT