JLG X14JH Operator Manual - Manual (Page 39)

2.5.1 BATTERY CUTOUT
This device situated on the right side of the electric components box cuts the electric circuit of the
machine locking all its movements. It can be seen easily and is of easy access without any tools. It
must be put on every time you leave the machine at the end of a work shift or for longer periods.
By turning the key clockwise you cut the electric circuit of the machine. By turning the key anti‑
clockwise you cut the electric circuit of the machine and you can remove the key.
2.5.2 DISTRIBUTOR OVERPRESSURE VALVES
All the distributors on the platform are equipped with an overpressure valve that limits the
pressure reached inside the system to the calibration pressure of the valve itself. These valves
are calibrated by qualified people, when testing the platform and they must never be tampe‑
red with.
BOOM LIFT MODELS X14JH
JLG
36 X14JHR0220311