JLG X14JH Operator Manual User Manual
Page 65
port, paying attention to allow it to descend as parallel as possible to the basket support;
‑ Screw on the two aluminium lids.
2.11 TRANSPORT SAFETY REGULATIONS
Make sure that the means of transport for the platform has a suitable capacity and that no
part of the platform comes out of the limits prescribed by the Highway Code.
2.11.1 LOADING AND UNLOADING ON RAMPS
The platform has a very high manoeuvrability and stability even when translating. However
we recommend the user to operate carefully even during operations apparently simple.
For example to load on a lorry do the following:
‑
park the lorry or the trailer on a flat surface;
‑
make sure that the ramps and the trailer are strong enough to bear the weight of the
machine and that there are no debris or slippery material;
‑
if the vehicles are not properly equipped put blocks under the ramps;
‑
widen the platform crawler;
‑
place the ramps parallel between each other at a distance equal to the one between the
tracks;
‑
climb onto the ramps proceeding with the machine orientated with the control car
toward the rear part;
‑
near the arrival place, proceed carefully to avoid strong jolts when passing from the
slant plane to the arrival plane;
‑
park the machine so that no parts come out of the outline of the mean of transport.
To get off proceed following the above‑mentioned indications and prescriptions.
BOOM LIFT MODELS X14JH
JLG
62
X14JHR0220311
IMPORTANTE
IMPORTANT
RAMPS
CHOCKS