JLG X14JH Operator Manual - Manual (Page 58)

55
Never rotate the platform with the control car completely lowered; to avoid hitting the stabi‑
lisers with lower part of the basket, it is necessary and mandatory to lift it of about 1 metre.
If the machine does not allow the opening of the jib, check the overall load introduced on the
control car as the load sensor has probably sensed a higher load; if it were not the case, the
proper 120kg option has not been selected with the proper control and in this case the machi‑
ne does not allow the movement of the jib. If instead all the conditions have been met, check
the working order of the platform and contact the customer service.
To close the machine, follow these movements:
‑ Lower the jib;
‑ Re‑enter the withdraw;
‑ Close the third arm;
‑ Lower the pantograph;
‑ Bring the arm on the support;
‑ Raise the stabilisers.
• It is absolutely forbidden to carry any types of material on the control car if the
machine has not been stabilised and completely closed. Loading material in the con‑
trol car when it is overhead from for example roofs or balconies etc. can cause the una‑
voidable turning over of the machine exposing the occupants and ground staff to a
probable death risk.
• Never use the machine to carry loads; the machine can carry two people (80kg each)
plus 40 kg tools or in 1470 version using the jib one person (80kg) and 40kg tools.
• When lowering the machine near the column, the potential risk of shearing the arms
is signalled on stickers. Anyhow it is the user’s responsibi‑
lity to make people move away from this area.
Never use the machine to carry objects with a large surface to the force of the wind (e.g. large
signboards) even if there are within the machine load limits.
BOOM LIFT MODELS X14JH
JLG
X14JHR0220311
IMPORTANTE
PERICOLO
PERICOLO
DANGER
DANGER
IMPORTANT