CK Electric Part KX-FMC230 - Manual (Page 38)

38
Dialing
Storing telephone numbers in the handset !
You can store up to 10 telephone numbers in the handset. The dialing buttons (0 to 9) function as memory
stations. The TALK/BATT LOW indicator light must be off.
1 Press (PROGRAM) .
¡ The TALK/BATT LOW indicator flashes.
2 Enter the telephone number up to 16 digits.
¡ If you misdial, press (PROGRAM) to end
storing, then repeat from step 1.
3 Press (AUTO) .
4 Press a memory station number (0 to 9).
¡ A confirmation tone sounds (see below).
¡ To store other numbers, repeat steps 1 through
4.
Note:
¡ Numbers stored in the handset can only be dialed by
the handset.
What the confirmation tone
means
1 beep: The new number is stored.
2 beeps: The number is the same as a
previously stored one.
To erase a stored number
1. Press (PROGRAM) .
2. Press (AUTO) and the memory station number
(for the telephone number to be erased).
(PROGRAM)
(AUTO)
Memory station
number
TALK/BATT LOW
indicator