CK Electric Part KX-FMC230 - Manual (Page 79)

79
Multi-Function
Center/PC
Setup
Connecting to a computer !
To run the Multi-Function Center software, you need the following software and hardware.
¡ IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
¡ Microsoft Windows 3.1, 3.11 or Windows 95
¡ Hard Disk drive with at least fourteen (14) MB of available storage
¡ RS232C Serial Port
Note:
¡ The unit cannot print on envelopes.
» If your PC has a 9 pin com port:
RS232C cable
(Included)
To COM port
25 Pin Male
25 Pin Adaptor
(Included)
9 Pin Female
» If your PC has a 25 pin com port:
9 Pin Female
RS232C cable
(Included)
25 Pin Male
To COM port