CK Electric Part KX-FMC230 - Manual (Page 52)

52
Sending documents from memory !
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages, based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 124.
Setting memory transmission !
1 Press (MENU) .
Display:
2 Press K , then A E .
3 Press (START/COPY/SET) .
4 Press or to select “ON”.
¡ If this feature is not required, select “OFF”.
5 Press (START/COPY/SET) .
6 Press (MENU) .
SETUP ITEM [ ]
MODE=ON [ Ÿÿ ]
MODE=OFF [ Ÿÿ ]
MEMORY XMT
SYSTEM SET UP
Transmitting documents from memory !
1 Insert the documents FACE DOWN.
2 Enter the telephone number by using regular
dialing, one-touch dialing, speed dialing or the
electronic telephone directory.
3 When using regular dialing, press
(START/COPY/SET) .
¡ The documents will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
¡ The amount of memory used will be shown as a
percentage on the display.
Display:
Amount of memory used
PAGES=01 05
Note:
¡ The stored documents will be automatically erased after transmission.
¡ To cancel the memory transmission, press (STOP) during or after scanning the documents.
¡ If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be
decreased.
¡ If the stored documents exceed the memory capacity, the transmission will be canceled.
Dial keypad
FACE DOWN
(STOP)
(START/COPY/SET)
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU) Dial keypad
Sending Faxes