CK Electric Part KX-FMC230 - Manual (Page 95)

95
Help
For Assistance, Call 1-800-435-7329
Error Messages
CODE MEANING PRINTED MESSAGE
Error messages on printed reports !
When a problem has occurred, one of the following messages will be printed on the transmission and journal
reports.
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT RESPOND
PRESSED THE STOP KEY
THE COVER WAS OPENED
OK
¡ A transmission or reception error occurred. Try again or check
with the other party.
¡ A document is jammed. Remove the jammed document (p. 109).
¡ A transmission or reception error occurred because of a problem
with the other party’s machine. Check with the other party.
¡ The document was not received due to memory being full.
¡ The document was not fed into the unit properly. Try again.
¡ The receiving unit was busy or ran out of recording paper. Try
again.
¡ The START/COPY/SET button was pressed when the document
was not set properly. Set the document properly and press the
START/COPY/SET button after confirming the fax tone.
¡ The other party’s machine is not a facsimile. Check with the other
party.
¡ The STOP button was pressed and fax communication was
canceled.
¡ The front cover was opened during fax transmission.
¡ Fax communication was successful.
41–72
FF
—
—
—
—
—
—
—
—