CK Electric Part KX-FMC230 - Manual (Page 61)

61
Fax/Copy
1 2 3
4 5 6
7 8 9
0
FAX
AUTO RECEIVE
1 Turn on the answering machine.
¡ If the answering machine is not turned on, all
incoming calls will be answered by the facsimile
unit and callers cannot leave messages.
2 Press (AUTO\RECEIVE) on the facsimile unit until
the FAX indicator light will turn on.
¡ The display shows the following message.
Display: EXT.TAM MODE
Using the EXT.TAM mode !
To set the facsimile unit and telephone answering machine to receive voice messages and send fax
messages, proceed as follows.
Changing from the FAX ONLY mode to the EXT.TAM mode !
Change the AUTO RECEIVE setting from the FAX ONLY mode to the EXT.TAM mode.
1 Press (MENU) .
Display:
2 Press K , then @ E .
3 Press (START/COPY/SET) .
4 Press or to select EXT.TAM.
¡ To return to the FAX ONLY mode, select
FAXonly.
5 Press (START/COPY/SET) .
6 Press (MENU) .
SETUP ITEM [ ]
MODE=EXT.TAM[ ML ]
MODE=FAXonly[ ML ]
AUTO RECEIVE
SYSTEM SET UP
(START/COPY/SET)
(MENU) Dial keypad
The FAX indicator is on.
Note:
¡ Every time the facsimile unit receives a document, a
silent pause or fax tone may be recorded on the
answering machine.
¡ Set the receive mode of the facsimile unit to the TEL
mode under the following conditions:
—when you wish to set the number of rings on the
answering machine to more than 5, or
¡ —when you wish to use the auto transfer functions
(transfer, pager alert, etc.) on the answering
machine.
¡ Note that automatic fax sending can not be received
automatically in the TEL mode.
Receiving Faxes