CK Electric Part KX-FMC230 - Manual (Page 42)

42
Dialing
Setting the dialing mode
(touch tone or pulse)
!
The unit will automatically set the dialing mode to TONE or PULSE when the unit is turned on if this feature is
set to AUTO.
If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below.
1 Press (MENU) .
Display:
2 Press K , then A C .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
5 Press (START/COPY/SET) .
6 Press (MENU) .
Note:
¡ If you change to a different telephone company and
this company has a different dialing mode service,
reset your dialing mode.
SETUP ITEM [ ]
MODE=AUTO [ Ÿÿ ]
DIALING MODE
SYSTEM SET UP
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU) Dial keypad