Mounting support requirements, Electrical power requirements, Space requirements – Labconco Coated Steel, Fiberglass and PVC Blowers 7183200 User Manual
Page 10
6
Chapter 2: Prerequisites
Product Service 1-800-522-7658, International 816-333-8811
Mounting Support Requirements
You must provide vibration isolators, vibration mounting pads,
and/or a roof curb support for proper mounting of the blower.
Vibration isolators or vibration mounting pads are available from
many sources such as a local industrial supply company.
Labconco recommends supporting the blower with 5/16" diameter
mounting hardware.
Electrical Power Requirements
The blower wiring should be terminated at the motor end plate and
wired according to the specific voltage and terminations on the
motor. Locate the specific wiring voltage for your blower motor in
the chart in Chapter 4: Performance Data and Safety Precautions.
Space Requirements
The dimensions for the different models are shown in Appendix B:
Blower Dimensions.