Labconco Coated Steel, Fiberglass and PVC Blowers 7183200 - Manual (Page 6)

2
Product Service 1-800-522-7658, International 816-333-8811
Chapter 1: Introduction
About This Manual
This manual will help you learn how to install, use, and maintain
your blower. Instructions for installing optional equipment on
your blower are also included.
Chapter 1: Introduction provides a brief overview of the blower,
explains the organization of the manual, and defines the
typographical conventions used in the manual.
Chapter 2: Prerequisites explains what you need to do to prepare
your site before you install your blower. Electrical and service
requirements are discussed.
Chapter 3: Getting Started contains the information you need to
properly unpack, inspect, install and certify your blower.
Chapter 4: Performance Data and Safety Precautions explains
how the blower operates and the appropriate precautions you
should take when using the blower.
Chapter 5: Using your Blower discusses basic operation.
Chapter 6: Maintaining Your Blower explains how to perform
routine maintenance on your blower.
Chapter 7: Modifying Your Blower, Calculating Static Pressure
Loss, and Blower Sizing explains how to modify the blower or add
ductwork accessories.
Chapter 8: Troubleshooting contains a table of situations you may
encounter while using your blower including the probable causes
of the problems and suggested corrective actions.
Appendix A: Blower Replacement Parts contains labeled diagrams
of all of the components of the blowers.
Appendix B: Blower Dimensions contains comprehensive diagrams
showing all of the dimensions for the various blowers.
Appendix C: Blower Environmental Conditions contains the
environmental conditions to operate the blower.