Emerson MicroCEM - Manual (Page 72)

Instruction Manual
748467-A
January 2002
3-20 Operation Rosemount Analytical Inc. A Division of Emerson Process Management
Model MicroCEM
f. Alarm Log File Format
The log file contains data in a flat, AS-
CII, CSV file. The following are the
fields of the file, in order of occurrence.
The days or months maintained in the
Alarm Log depends on how often trou-
ble conditions are recorded. If there
are rarely alarm conditions recorded,
there is enough space for many years
of alarm logs to be recorded.
Name Description Example
Date/Time Month-day-year Hours:Minutes:Seconds 3-7-2001 10:24:57
Fault Level 1=informational, 2=warning, 3=critical 3
Fault Type 0 = O2 Calibration Failed
1 = CO Calibration Failed **
2 = NOx Calibration Failed
3 = O2 High Limit
4 = O2 Low Limit
5 = CO High Limit **
6 = CO Low Limit **
7 = NOx High Limit
8 = NOx Low Limit
9 = O2 Emission Limit
10 = CO Emission Limit **
11 = NOx Emission Limit
12 = 5 Volt Fault **
13 = 6 Volt Fault **
14 = 24V Over Max
15 = 24 Low Min
16 = Converter Over Temp
17 = Converter Low Temp
18 = Converter On Failed **
19 = Converter Off Failed **
20 = Zone Over Temp
21 = Zone Low Temp
22 = Zone Heater On Failed **
23 = Zone Heater Off Failed **
24 = Zone Cooler On Failed **
25 = Zone Cooler Off Failed **
26 = Heater Fan On Failed **
27 = Heater Fan Off Failed **
28 = Cooler Fan On Failed **
29 = Cooler Fan Off Failed **
30 = PDT Over Temp
31 = PDT Low Temp
32 = PDT On Failed **
33 = PDT Off Failed **
34 = PMT Over Temp
35 = PMT Low Temp
36 = PMT On Failed **
37 = PMT Off Failed **
38 = O2 Over Temp **
39 = O2 Low Temp **
40 = O2 On Failed **
41 = O2 Off Failed **
42 = Warmup Time Limit
70 = IO Board Failed
2
Fault Description ASCII string describing fault. Up to 200 characters. CO Calibration Failed
** - Alarm is not implemented in this version of software or reserved for future use.
Table 3-9. Alarm Log File Format