Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 113)

Studio Display
073-00335-A | 113 © 2022 Apple Inc. All rights reserved.
Tilt-Adjustable Stand | Removal
Removal
1. Insert the 20IP bit into
the 2.5–25 Nm adjustable
torque wrench. Use the
adjustable torque wrench
and 20IP bit to remove the
two 20IP screws (452-
06708) as shown.
2. Replace the removed screws
with the alignment pins
for stand and VESA mount
adapter.
Ensure that the support wedge is between the enclosure and the stand to keep the display in place.
Ensure that the support wedge is between the enclosure and the stand to keep the display in
place.
Important
Note: If the alignment pins
don’t easily screw in, loosen
the other five 20IP screws.