Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 90)

Studio Display
073-00335-A | 90 © 2022 Apple Inc. All rights reserved.
Removal
Cables | Removal
1. Use ESD-safe tweezers
to peel the polyester film
tabs from both ends of the
ambient light sensor flex
cable. Then use the black
stick to flip up the locking
levers and slide the ends
of the flex cable out of the
connectors.
Ensure that the support wedge is between the housing and the stand to keep the housing in place.
Important
2. Use the black stick to peel
the ambient light sensor
flex cable off the display to
remove it.
3. Pinch the sides of the end
of the DisplayPort power
cable and slide it out of the
connector (1).
4. Pull the tab to flip up
the locking bar on the
DisplayPort signal flex
cable (2). Then slide the end
of the flex cable out of the
connector (3).
5. Use the black stick to peel
the DisplayPort power/
signal cable bundle off the
right speaker to remove
it (4).