Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 46)

Studio Display
073-00335-A | 46 © 2022 Apple Inc. All rights reserved.
16. Use both hands to press the
edge of the display and help
set the adhesive. Move your
hands along the edge of the
display, pressing at each
location.
17. Place the display in the
microfoam bag. Then place it
flat on a clean table with the
display side facedown. Wait
30 minutes for the adhesive to
attach to both the display and
the housing.
Caution
Don’t drag the display on
the table.
Display (VESA mount adapter) | Reassembly
• If you reinstalled the existing display or logic board, the repair is complete.
• If you replaced the display or logic board, complete steps 19 through 21. Ensure that you have a
Mac with Apple Service Utility installed and a USB-C charge cable before you continue.
Important
18. Remove the display from the microfoam bag.