Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 49)

Studio Display
073-00335-A | 49 © 2022 Apple Inc. All rights reserved.
Ensure that the support wedge is between the housing and the stand to keep the display in place.
Important
Removal
1. Pinch the sides of the
ends of the five cables
and slide them out of the
connectors (1).
Logic Board | Removal
2. Pull the tabs to flip up the
locking bars on the two flex
cables (2). Then slide the
ends of the two flex cables
out of the connectors.
3. Use ESD-safe tweezers to
peel back the polyester film
tabs on the three locking
lever connectors (3). Use
the flat end of the black
stick to flip up the three
locking levers. Then slide
the three flex cables out of
the connectors.
4. Use the flat end of the black
stick to press and hold
the “PUSH” button on the
zero-insertion force (ZIF)
connector (4) and use ESD-
safe tweezers to slide the
end of the flex cable out of
the connector.