Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 80)

Studio Display
073-00335-A | 80 © 2022 Apple Inc. All rights reserved.
6. Starting with the DC power
supply board on the right,
use the T8 screwdriver to
remove the six T8 screws
(923-07143). Then remove
the DC power supply board.
Power Supply Boards | Removal
7. Use ESD-safe tweezers to
peel back the polyester film
tab on the power supply
signal flex cable.
8. Use the black stick to flip up
the locking lever. Then slide
the end of the power supply
signal flex cable out of the
connector.
If you’re replacing the
power supply boards,
continue to step 7. If you’re
removing the power supply
boards for a different
procedure, skip to step 9.
Important