10 optional usb extender mounting options, Optional usb extender mounting options – Icron Four-Port USB 3-2-1 Raven 3104 Point-to-Point Extender System (328') User Manual
Page 11
10
Optional USB Extender Mounting Options
The bottom of the enclosure features four convenient pre-drilled holes for optional mounting. Based on your
requirements, choose from two available mounting options:
1. USB Extender Mounting Kit
(Purchased separately Order Part #10-00620 USB Mounting Kit - Silver)
2. USB Extender Direct Surface Mounting
(Using your own hardware, stencil provided on page 11)
OPTION 1: USB Extender Mounting Kit
Contents:
• 2 mounting brackets
• 4 (M3) locking washers
• 4 (M3 x 10mm) Phillips screws with split lock washers
• Mounting bracket installation guide
(see diagram below)
1 kit required to mount per LEX or REX
Using a Phillips screwdriver, in the order as illustrated below, secure the provided screws and brackets into
place.
Once the bracket mounting is secured onto the extender, it is ready for mounting onto a surface. Please note
you will need to provide your own screws to secure the extender using the available slots on each bracket.