Icron Four-Port USB 3-2-1 Raven 3104 Point-to-Point Extender System (328') - Manual (Page 4)

Introduction
This guide provides product information for the Icron USB 3-2-1 Raven™ 3104 Pro, installation instructions
and troubleshooting guidelines. The instructions in this guide assume a general knowledge of computer
installation procedures, familiarity with cabling requirements and some understanding of USB devices.
NOTE: Notes provide additional information that could be useful.
CAUTION: Cautions provide important information about an operational requirement.
Product Contents
Your Raven 3104 Pro extender system contains:
• LEX (Local Extender)
• REX (Remote Extender)
• USB 3.1 Gen 1 Cable
• LEX 24V DC 1A International Power Adapter
• REX 24V DC 2.71A International Power Adapter
• 2 x Country Specific Power Cables
•
Quick Start Guide
Features
The Raven 3104 Pro incorporates ExtremeUSB-C™ technology, enabling users to extend USB 3.2 beyond the
standard 3m cable limit for USB 3.2 peripheral devices. This extender system is composed of two individual
units, the LEX and the REX, and has the following key features:
• Up to 100m of extension when directly connected over CAT 6a/7 cable
• Support for new USB 3.2 Gen 1/2 host controllers and devices (up to 5Gbps)
• Supports all device types
• Optimized for camera and video capture devices
• Backwards compatible to USB 2.0 devices
For best performance install the Raven 3104 Pro using Shielded or Foiled CAT 6a/7 cable.
note
3
note
The Raven 3104 Pro includes the ExtremeUSB-C™ suite of features:
• Transparent USB extension supporting USB 3, 2 and 1
• True plug and play; no software drivers required
• Works with all major operating systems: Windows®, macOS™, Linux® and Chrome OS™