Vuze 4K 3D 360 Spherical VR Camera (Yellow) - Manual (Page 6)

Safety
6 Proprietary. Humaneyes Technologies
Charger Electrical Safety
We recommend you charge the camera in an ambient temperature from 0° to 30°C
(30 to 85 °F) while the camera is off. We recommend to use the original camera charger under the
suggested operating conditions for optimal charging time.
• When not in use, avoid placing or storing the product in the following places or
under the following conditions:
o Exposed to direct sunlight.
o Inside a car.
o In a humid environment or exposed to dust.
• Before cleaning the camera disconnect it completely from the power supply and
make sure the interface panel cover is closed. Use a soft, non-linting cloth to clean
the product. Never use chemical cleaning agents such as alcohol, acetone or
diluents for cellulose lacquers.
• This camera does not contain any user replaceable or serviceable parts. Do not
take apart or attempt to service the camera yourself. The internal battery is not
user replicable. Never remove the cover or any part of the housing of the camera.
In the event of an equipment malfunction, all repairs must be performed either by
Humaneyes Technologies or by an authorized agent. For service information
contact Humaneyes Technologies customer support at www.vuze.camera/contact
• Be careful not to subject the camera to high impact. If the camera was subject to a
fall or other high impact, check the camera carefully for any damage. If any
damage is visible the use of the camera must be stopped immediately.
• This product contains an internal non-replaceable Li-ion polymer battery.
• The following information on electrical safety must be observed, failing to follow these
instructions may lead to electric shock, fire and/or serious personal injury or death.
• Never use the charger if the power cable is damaged. Check the power cable on a
regular basis to ensure that it is in proper operating condition.
• Before charging the camera and plugging the charger into the main power supply,
always ensure that the nominal voltage setting on the charger matches the nominal
voltage of the AC supply network.
• Do not insert the charger plug into electrical outlets that are dusty or dirty. Insert the
plug firmly and all the way into the outlet. Otherwise, sparks that result may lead to fire
and/or injuries.
• Do not insert any metallic or wet objects into the camera interfaces. Only the intended
cable and memory cards should be inserted in the camera interfaces.