Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 106)

rekordbox
106
En
2 Set the [LINE/PHONO] switch on the unit's rear panel to [LINE] .
3 Set the [ A, LINE, B] switch or [ A, PHONO/LINE,
B] switch on the unit's top panel to [LINE] or [PHONO/LINE] .
4 Turn the [TRIM] knob and move the channel fader to adjust the
volume of the sound output from each channel.
 Mixing the sound of turntables, etc.
1 Connect turntables or other phono-level (MM cartridge) output
devices to the [LINE/PHONO] input terminals of [CH3] or [CH4] .
• [CH1] and [CH2] are input terminals for line-level devices only.
• Be sure to connect the ground wire of the turntable to the [SIGNAL GND]
terminal of the unit.
2 Set the [LINE/PHONO] switch on the unit's rear panel to [PHONO] .
3 Set the [ A, PHONO/LINE, B] switch on the unit's top panel
to [PHONO/LINE] .
4 Turn the [TRIM] knob and move the channel fader to adjust the
volume of the sound output from each channel.