Serato dj pro – Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) User Manual
Page 142
Serato DJ Pro
142
En
Using an effect
1 Press the
[BEAT
]
button or
[BEAT
]
button while holding the
[SHIFT]
button.
Select the BPM measurement mode.
–
[AUTO]
: Press the
[BEAT
]
button while holding the
[SHIFT]
button. The
BPM is automatically measured from the input audio signal.
–
[TAP]
: Press the
[BEAT
]
button while holding the
[SHIFT]
button. Enter
the BPM manually.
2 Turn the
[BEAT FX]
select knob.
Selects a type of effect in Serato DJ Pro.
3 Turn the BEAT FX CH select knob.
Selects a channel to apply the effect to.
–
[SP]
: Applies the effect to the sampler sound.
–
[MIC]
: Applies the effect to the microphone sound.
–
[1]
to
[4]
: Applies the effect to the sound of the respective channel.
–
[MST]
: Applies the effect to the sound of the master channel.
•
Set
[Sample Player Output Select]
to
[A]
in Serato DJ Pro.
•
For microphone sound and external input sound, the effect from the unit will
be applied.
Read: Beat FX types on the unit (page 143)
4 Press the
[BEAT
]
button or
[BEAT
]
button.
Sets the number of beats synchronized to the effect sound.
The effect time corresponding to the number of beats is set automatically.
5 Press the
[BEAT FX ON/OFF]
button.
The effect is applied to the sound.
You can adjust the parameter of the effect by turning the
[BEAT FX LEVEL/
DEPTH]
knob.
The
[BEAT FX ON/OFF]
button flashes when the effect is on.
•
Press the
[BEAT FX ON/OFF]
button again to turn the effect off.