Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 58)

Part names and functions
58
En
Rear panel
1 Kensington security slot
Connection for a cable lock for security.
2 MASTER 1 output terminals (balanced XLR)
Connection for analog input terminals of a power amplifier, etc.
• Be sure to use these terminals as balanced outputs. If you use an XLR to
RCA converter cable (or a converter adapter), etc. to connect to the
unbalanced input (RCA, etc.), sound quality may decrease or unwanted
noise may occur.
• Be careful not to accidentally insert the power cord plug of another unit or
device into any of these terminals.
• Never connect devices capable of supplying phantom power to these
terminals.
3 MASTER 2 output terminals (RCA pin jack type)
Connection for analog input terminals of a power amplifier, etc.
• To connect to a balanced input (RCA, etc.), use the [MASTER 2] output
terminals.
4 BOOTH output terminals (1/4” / 6.35 mm, TRS)
Outputs for a booth monitor.
• Be sure to use these terminals as balanced outputs. If you connect them to
an unbalanced input, sound quality may decrease or unwanted noise may
occur.
5 SIGNAL GND terminal
Connection for the ground wire of a turntable to reduce unwanted noise that
occurs when a turntable is connected.
MASTER USB
6 6 2 3 7 7 8 8 4 9 10 11 12 13 14 15 16 1 5