Pc/mac setup, Before you start – Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) User Manual

Page 8

Advertising
background image

Before you start

8

En

PC/Mac setup

To input or output your PC/Mac’s audio to/from the unit, install the
dedicated audio driver software and/or Setting Utility on your PC/Mac.
If you install the audio driver software to your PC (Windows), Setting
Utility will also be installed with the driver software.
If you use a Mac, install Setting Utility only.

For information on the latest system requirements, compatibility, and
supported operating systems, visit the URL below.

pioneerdj.com/support/

Operation isn’t guaranteed on all PC/Mac models, even if the system
requirements are met.

Operation isn’t guaranteed when multiple units are connected to a
PC/Mac.

If a PC (Windows) without the dedicated audio driver software
installed is connected to the unit, errors may occur on the PC.

Malfunctions may occur due to incompatibility with other software
installed on a PC/Mac.

Installation

Notes on installation

Turn the unit off and disconnect the USB cable connected to the unit
and the PC/Mac before installation.

Close all applications running on the PC/Mac before installation.

You’ll need admin rights to install the dedicated software to your PC/
Mac.

Read the License Agreement terms carefully before installation.

If you quit the installation halfway through, perform the installation
procedure from the beginning again.

After the installation is complete, connect the PC/Mac to the unit.

Operation isn’t guaranteed on all PC/Mac models.

Advertising