LEICA M11 Monochrom Rangefinder Camera - Manual (Page 116)

PHOTOGRAPHY ▸ SHOOTING MODES 116
SHOOTING MODES
CONTINUOUS SHOOTING
The camera is set to single shots by default ( Single ). Series of shots
can also be created to e.g. capture motion sequences at various
stages.
▸ Select Drive Mode in the main menu
▸ Select the desired setting
( Continuous - Low Speed , Continuous - High Speed )
Once you have finalized your settings, the camera will do continuous
shootings as long as you keep the shutter button pressed down fully
(and you have sufficient space on your memory card).
Notes
• We recommend deactivating the preview mode ( Auto Review )
when using this function.
• The specified framing speed stated in the technical information
refers to a default setting ( ISO 200 , JPG format L-JPG ).
• Regardless of how many frames were taken in a series, the last
image in the series or the last image saved on the memory card
while the saving process is ongoing will be displayed first in both
review modes.
• Continuous shooting is not possible if a flash is used. Only a single
shot will be taken if the flash function is activated.
• Continuous shooting mode is not available in combination with
the self-timer function.
• The buffer memory of the camera only allows a limited number
of frames in series and in the selected exposure frequency. The
exposure frequency is reduced, once the capacity limit of the
camera's buffer memory is reached.