Editing file names – LEICA M11 Monochrom Rangefinder Camera User Manual
Page 81
STILL IMAGE SETTINGS ▸ DATA MANAGEMENT
81
Notes
• When using memory cards that were not formatted with this
camera, the file numbering will begin with 0001 again. Should the
memory card already contain a file with a higher number, then
numbering will be continued from that number.
• A relevant message will be displayed on the LCD panel once folder
number 999 and file number 9999 are reached, and all numbering
must be reset.
• Format the memory card and reset the frame number right after
to reset the folder number to 100.
EDITING FILE NAMES
▸
Select
Camera Settings
in the main menu
▸
Select
Edit File Name
• A keyboard submenu is displayed.
• The input line contains the factory setting “L” as the first letter
of the file name. Only this letter can be changed.
▸
Enter a letter of your choice (see p. 56)
▸
Confirm
Notes
• The change to a file name applies to all subsequent files or until a
new change is made. The sequential number will not be affected;
but it will be reset when a new folder is created.
• During a reset to factory settings, the first letter will always be
reset to “L”.
• Lower case letters are unavailable.