LEICA M11 Monochrom Rangefinder Camera - Manual (Page 44)

CAMERA OPERATION ▸ CONTROL ELEMENTS 44
SHUTTER-SPEED DIAL
The shutter-speed dial has no stop, which means it can be turned
in either direction from any position. It will click at each engraved
position and for intermediate values. Intermediate positions outside
the click positions must not be used. Please read the section “Expo-
sure” (see p. 104) for details about exposure settings.
– A : Aperture priority
(automatic shutter speed control)
– 4000 – 8s : Fixed shutter speeds of 1⁄4000 s to 8 s
(with intermediate values, clicking in 1⁄2 increments)
– B : Long-term exposure (bulb)
– : The shortest possible sync speed (1⁄180 s) for flash mode
ISO DIAL
– A : Automatic ISO sensitivity control
– 125 – 6400 : Fixed ISO values
– M : Manual ISO sensitivity control
Fig. 1 Fig. 2
▸ Push the ISO dial up until you feel it clicking into place and the red
line (fig. 2 ) is visible
▸ Turn the dial to set the desired value
▸ Push down the ISO dial