LEICA M11 Monochrom Rangefinder Camera User Manual

Page 162

Advertising
background image

FAQ

162

FAQ

Important

All mentions of “EVF” or “Electronic Viewfinder” in this manual refer to the optional accessory Leica Visoflex

2

.

Using the older “Leica Visoflex” model with the Leica M11 Monochrom can – as a worst case scenario – result in irreparable damage to the

camera and/or the Visoflex. Please contact Leica Customer Care if in doubt.

Problem

Possible causes to check

Troubleshooting suggestions

Battery issues

Battery is depleted too quickly

Battery too cold

Warm the battery (e.g. in pants pocket) and only insert

directly before use

Battery too hot

Allow battery to cool down

LCD panel or EVF set too bright

Reduce brightness

Power save mode deactivated

Enable

 Camera Standby 

and/or

 Display Standby 

Camera WLAN is permanently activated (the connectivity

mode

 Performance mode 

is selected)

Select another connectivity mode

(

 Eco mode 

or

 Airplane mode 

, see p. 150)

Continuous use of LCD panel (e.g. in Live View mode)

Deactivate the function

Battery has been recharged too many times

The battery has reached the end of its operating time

Replace battery

Preview of the recorded images (

 Auto Review 

) activated

Deactivate the function

Charging process not starting

Incorrect battery polarization or faulty charger connection Check polarization and connection

Charging takes too long

Battery too hot or too cold

Charge the battery at room temperature

Charging pilot light is on, but battery isn't

charging

The battery contacts are dirty

Clean the contacts with a soft, dry cloth

Battery has been recharged too many times

The battery has reached the end of its operating time

Replace battery

Camera problems

The camera suddenly switches itself off

Battery is depleted

Charge or replace the battery

The camera won’t switch on

Battery is depleted

Charge or replace the battery

Battery too cold

Warming the battery (e.g. in pants pocket)

Battery was inserted incorrectly

Check its polarization

Bottom cover was inserted incorrectly

Check the directionality and lock

Advertising